index.html
Specifications

How to use Quick Booster Engine Treatment:
The instructions vary for cars, buses and tricks. The instructions are as follows:
- Cars:
Drain oil and change filter
For every 4 litres of engine oil, pour 500ML of Quick Engine Booster Treatment
For optimum results, add Quick Booster Engine Treatment with every second oil change
- Buses & Trucks
Drain oil and change filter
For every 40 liters of oil, ad 6 of the 500ML bottles
For optimum results, add Quick Booster Engine Treatment with every second oil change

One bottle of Quick Booster can protect your engine for more than 80,000 KM.(Imagine the savings)
Use Quick Booster for all your personal and commercial vehicles to save gas, friction and wear.

A Universal Lubricant

YOU CAN USE QUICK BOOSTER IN ANY ENGINE THAT USES…
GASOLINE
DIESEL
CNG
NATURAL GAS
PROPANE

QUICK BOOSTER IS A MIRACLE ENGINE TREATMENT, NOT AN OIL, IT PAYS FOR ITSELF IN GAS SAVINGS!

The Most Advanced Treatment in the World
100% petroleum product

Hi-Tech Engine Treatment
For
Gasoline, Diesel, Propane and natural Gas

Your Best Defence Against Repair Expenses

Gives Your Engine a Longer Life The Longer You Drive, The Better it Gets.

Keeps Your Engine Running with Maximum
Protection and Good Performance at all times.

Hi-Tech Engine Treatment

SAFETY, PROTECTION PERFORMANCE
100% Oil Base Product

Benefits:

Lowers Engine Temperature
Reduces Fuel Consumption
Reduces Maintenance Costs
Reduces Friction and Wear
Easier and Quicker Engine Starting
Increases Engine Life
Reduces Pollution
Reduces Engine Noise
Improve overall Performances
Prolonges Oil Life
Protects against Corrosives
Increase Resale Value of Vehicle

Directions for use:
Drain oil and change filter
Refill with quality oil to capacity, less amount of quick booster
Shake quick booster and add 1 bottle for every 4 litres of engine oil

Keep Out of Reach of Children. Don’t pollute. Return used oil to collection centers.

For warranty information, visit Terms page


Section 1: PRODUCT AND COMPANY IDENTIFICATION
Chemical family:    Mixture.
Product uses:    Engine Oil.
Supplier:   Same as manufacturer.
Manufacturer:    Quick Booster Canada Inc.
                                 14 Leeward drive
                                 Brampton, Ontario
                                 L5S 5V6
Manufacturer emergency phone number: Canutec  613-996-6666.

Section 2: INGREDIENT INFORMATION


C.A.S

Concentration%

Ingredient Name

T.L.V.

LD/50

LC/50

 

 

No hazardous  ingredients

Not available

Not available

Not available

 

Section 3: HAZARD IDENTIFICATION
Route of entry:    Skin contact, eye contact, inhalation and ingestion. Effects of acute exposure
Eye contact:   Irritation.

Skin contact:      low toxicity.
                                May cause irritation.
                                High pressure injection under skin may cause serious damage.

Inhalation:          May cause nose and throat irritation.
                                May cause respiratory system irritation.
                                Excessive inhalation may cause dizziness, headache.

Ingestion:            Hazardous if aspirated into lungs during ingestion or vomiting.
                                May cause lung damage.

Effects of chronic exposure:       Prolonged or repeated contact may cause skin irritation

Sensitization to product:               Not available.

Carcinogenic effects:                      Not listed as a carcinogen.

Reproductive effects:                    Not listed as a carcinogen.

Reproductive effects:                    Not available.

Teratogenicity:                                  Not available.

Mutagenicity:                                    Not available.

Synergistic materials:                     Not available.

 

Section 4: FIRST AID MEASURES
Skin contact:      Remove contaminated clothing.
                                Flush with large amounts of water; use soap if available.
                                If injected by high pressure under skin, seek medical attention immediately.
                                Consult a physician if irritation persists.

Eye contact:       Flush eyes with clear, running water for 15 minutes while holding eyelids open.               
                                If irritation persists, consult a physician.

Inhalation:          Remove victim to fresh air. If not breathing, qualified personnel should administer artificial respiration. Get medical attention.

Ingestion:            Obtain immediate medical attention.
                                Do not induce vomiting.
                                If vomiting occurs, keep head below hips.
                                Never give anything by mouth to an unconscious person.
                                If conscious, give large amounts of water.

Additional Information:                
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies.

 
Section 5: FIRE FIGHTING MEASURES

Flammability:                                    
Not flammable.

Conditions of flammability:         
At temperatures at or above flash point.

Extinguishing media:                      Dry chemical.
                                                             Foam
                                                             Carbon dioxide.
                                                             Do not use water jet.
Special procedures:                       
Self –contained breathing apparatus required.

Do not spray water directly into containers to avoid danger of boil-over.
Firefighters should wear the usual protective gear.
Cool fire exposed containers with water spray.
               
Auto-ignition temperatures (°C):             
Not available
               
Flash point (°C), method:                            
based on lowest value component). >121.1 °C (>250 °F).
               
Lower flammability limit (% vol):              
Not available
               
Upper flammability limit (%vol):               
Not available
               
Explosion Data
Sensitivity to static discharge:                    
Take precautionary measures against static discharge.

Sensitivity to mechanical impact:             
Not available.

Hazardous combustion products:            
Oxides of carbon (CO, CO2). Smoke, Phosgene. Chloride        
(C12). Hydrogen chloride (HCI). Fumes. Aldehydes.
Oxides of sulphur (SOx). Incomplete combustion products.

Rate of burning:                                                              
Not available.
                                                                                               
Section 6: ACCIDENTAL RELEASE MEASURES
Leak/Spill:           Eliminate all sources of ignition.
                              Contain the spill.
                              Absorb with inert material.
                              Shovel or pump to drum or salvage tank.
                              Evacuate all non-essential personnel.
                              Prevent entry into drains, sewers, and other waterways.
                              Stop leak if without risk.
                              Wear appropriate protective equipment.
                              Notify the appropriate authorities as required.

Section 7: HANDLING AND STORAGE
Handling procedures and equipment:    Maintain a good personal hygiene.
                                                                         Handle and open container with care.
                                                                         Keep away from heat, sparks, and open flame.
                                                                         Avoid breathing vapors/mists.
                                                                         Use adequate ventilation.

Wash thoroughly after using, particularly before eating or smoking.
Wear personal protective equipment appropriate to task.
Empty containers containing residue may cause a hazard.
Do not reuse empty containers without commercial cleaning.
Destroy or thoroughly clean contaminated shoes.
Avoid contact with skin, eyes and clothing.
Do not pressurize, cut, heat, or weld empty containers.
Avoid spills, causes slippery surfaces.
Launder contaminated clothing prior to reuse.
Destroy contaminated clothing and shoes.

Storage requirements:                  Store in a cool and well ventilated area.
                                                           Store away from incompatible materials.
                                                           Keep container closed.
                                                           Keep away from ignition sources.
                                                           Do not store in open or unlabelled containers.

Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Precautionary Measures
Gloves/Type:     Chemical resistant gloves.
Respiratory/Type:   If working area is not ventilated, wear an approved respirator.
Eye/Type:   Safety glasses with side shield or vented goggles.
Footwear/Type:   Safety shoes per local regulations.
Clothing/Type:  Wear adequate protective clothes.
Other/Types:     Eye wash facility should be in close proximity.
                                               
Emergency shower should be in close proximity.

Ventilation requirements:           Local exhaust ventilation may be necessary when this material is heated or a mist is created.
                                                         Mechanical ventilation for confined areas.
Exposure limit of material:          Not available.

Section 9: PHYSICAL AND CHEMICAL PROPERTIES

Physical state:                   Liquid.
Apperance & odor:         Characteristics odour.
Odor threshold (ppm): Not available.
Vapour pressure (mmHg):           Not available
Vapour density (air=1):                 Not available.
Volatiles (%) by volume:               Not available.
Evaporation rate (butyl acetate = 1): Not available.
Boiling point (°C):             Not available.
Freezing point (°C):         Not available
pH:         Not available.
Specific gravity @ 20 °C:                Not available.
Density:               Not available
Solubility in water (%): Negligible.
VOC: Not available.

Section 10: STABILITY AND REACTIVITY
Chemical stability: Stable under normal conditions.
Conditions of instability:               Excessive heat
                                                           Freezing temperatures.
                                                           High energy sources of ignition
Hazardous polymerization:          Will not occur.
Incompatible substances:            Amines.
                                                           Acids.
                                                           Alkalines.
                                                           Metals.
                                                           Strong reducing agents.
                                                           Strong oxidizing agents.
Hazardous decomposition products:       Does not decompose as ambient temperatures.

 

Section 11: TOXICOLOGICAL INFORMATION
LD50 of product, species & route: Not available.
LC50 of product, species & route: Not available.

Section 12: ECOLOGICAL INFORMATION
Environmental toxicity: No data at this time.
Environmental fate: No data at this time.

Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal: In accordance with municipal, provincial and federal regulations. May be incinerated.
 
Section 14: TRANSPORT INFORMATION
D.O.T. Classification: Not regulated.
Section 15: REGULATORY INFORMATION
WHMIS Classification: Not controlled.
DSL Status: Appears on DSL.
TSCA inventory: All ingredients are listed on the TSCA inventory.

 


Terms of Use | Privacy Statement
© 2013 QuickBooster. All rights reserved